W E L C O M E

  

 

Laundry

Pure

    

FIND THESE

USEFUL LINKS

ATOP EVERY PAGE

  

24 11

KISS

 

 

 

 

LaundryPure Installation

Click HERE to listen to the LaundryPure Conference Call

Click HERE for printable version of this page.

 

LaundryPure Installation Instructions

1.  Remove unit and all accessories from box.

 

2. Level and mount wall bracket to wall either adjacent or behind the washer. Use screws and wall anchors provided.

Notice where LaundryPure attaches

to two points at the top of the bracket.

 

3.  Slide LaundryPure onto the wall bracket.

 

4.  Remove plastic caps from hose connections on LaundryPure.

 

5.  Turn off hot and cold water supply valves. 

6.  Inspect both ends of the new cold water supply hose to be certain the rubber washer is seated in each end.  Connect one end of the new cold water supply hose to the cold water supply valve. Connect the other end to the inlet connection on Laundry Pure. 

NOTE:  EcoQuest provides a rubber cold water supply

 

7.  Connect your washer's AC plug to the pigtail cord on the bottom of the LaundryPure.

 

8.  Plug in the power cord provided for LP to the socket on the bottom of the LaundryPure.

 

9. Plug the LaundryPure into your wall receptacle.

 

10.  Turn on the cold water supply valve.

 

11.  That's it. Start enjoying the LaundryPure lifestyle!!!

 

LaundryPure must be installed in an upright position, as shown.

It cannot be laid on a towel on the drier for temporary use.

Nor can it be installed on the underside of cabinets.

For liability reasons, LaundryPure cannot be installed

by an EcoQuest dealer. Even though the installation is very easy,

each unit must be installed by the customer

or by a plumber hired by the customer.